Mechanical and Electrical Installation


Use the threaded holes on the bottom side of the device to mount it to a bracket. We recommend using DIN 912 / ISO 4762 Hexagon or ISO 14579 Hexalobular socket head cap screws in stainless steel (A2 or A4).

Both Zivid 3D cameras have stationary and robot mounts available for purchase at

The Zivid One is able to mount to most standard camera tripods. Zivid Two requires an adapter plate to be connected for this function.

(Click on the images to enlarge)

Cooling clearance

Zivid cameras use active and passive cooling, allow some space around the device for airflow, and do not block the air opening on its front and rear sides. Advise the technical specifications for the operating temperature range for your camera.

Signal protection

Do not install Zivid cameras and cables next to high voltage devices that can generate high levels of electromagnetic disturbance. Do not route camera cabling through the same trunks/conduits with AC power cables and cables emitting high levels of disturbance.

Positioning correctly

Please checkout Working Distance and Camera Positioning to learn how to correctly position your camera.

Connecting to the computer

Zivid One

  1. Plug the power supply into the "24V" port and into a power outlet.
  2. Plug the USB cable into the "DATA" port and into a USB 3.0 port on your PC.

Direct connection

Zivid Two

  1. Plug the power supply into the "24V" port and into a power outlet.
  2. Plug the Ethernet cable into the camera and connect it to your computer.

We support the following network topologies:

Direct connection

Connection via Switch